PSU specifications
The PowerEdge R7615 system supports up to two AC or DC power supply units (PSUs).
Table 12. PSU specifications
PSU Class Heat
dissipatio
n
(maximu
m) (BTU/
hr)
Frequency
(Hz)
Voltage AC DC Current (A)
High line
wattage (200
—240 V AC)
Low line
wattage (100
—120 V AC)
700 W
mixed
mode
Titani
um
2625
50/60
200—240 V
AC
700 W N/A N/A 4.1
N/A 2625 N/A 240 V DC N/A N/A 700 W 3.4
800 W
mixed
mode
Platin
um
3000
50/60
100—240 V
AC
800 W 800 W N/A 9.2—4.7
N/A 3000 N/A 240 V DC N/A N/A 800 W 3.8
1100 W
mixed
mode
Titani
um
4125
50/60
100—240 V
AC
1100 W 1050 W N/A 12—6.3
N/A 4125 N/A 240 V DC N/A N/A 1100 W 5.2
1100 W
DC
N/A 4265
N/A
-48— -60 V
DC
N/A N/A 1100 W 27
1400 W
mixed
mode
Platin
um
5250
50/60
100—240 V
AC
1400 W 1050 W N/A 12—8
N/A 5250 N/A 240 V DC N/A N/A 1400 W 6.6
1800 W
mixed
mode
Titani
um
6610
50/60
200—240 V
AC
1800 N/A N/A 10
N/A 6610 N/A 240 V DC N/A N/A 1800 W 8.2
2400 W
mixed
mode
Platin
um
9000
50/60
100—240 V
AC
2400 W 1400 W N/A 16—13.5
N/A 9000 N/A 240 V DC N/A N/A 2400 W 11.2
NOTE: If a system with AC 1400 W or 1100 W PSUs operates at low line 100-120 V AC, and then the power rating per PSU
is degraded to 1050 W.
NOTE: If a system with AC 2400 W PSUs operates at low line 100-120 V AC, and then the power rating per PSU is
degraded to 1400 W.
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Enterprise Infrastructure Planning Tool available at Dell.com/calc.
Figure 22. PSU power cords
Technical specifications
27
To Next Page
Loading...
