Need help?Do you have a question about the Dell PowerEdge R760xa and is the answer not in the manual?
General| Product Family | PowerEdge |
|---|---|
| Model | R760xa |
| Form Factor | 2U Rack Server |
| Maximum Processors | 2 |
| Memory Type | DDR5 |
| Maximum Memory | 8TB |
| Memory Speed | 4800 MT/s |
| DIMM Slots | 32 |
| Management | iDRAC9 with Lifecycle Controller |
| Processor | Intel Xeon Scalable processors |
| Storage Controllers | PERC H965i, PERC H755, PERC H755N, PERC H355 |
| GPU Support | Up to four double-width GPUs |
| Network Options | 1GbE, 10GbE, 25GbE |
| Power Supply | 1400W, 1800W, 2400W Platinum |
| Operating System | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware vSphere |
| PCIe Slots | Up to 8 PCIe Gen5 slots |
| Security Features | Secure Boot, TPM 2.0 |
Provides step-by-step instructions for initial system setup, including unpacking and rack installation.
Covers setting up iDRAC IP address and logging in to the iDRAC Web User Interface.
Lists resources for installing the OS and downloading system drivers and firmware.
Guide to configuring BIOS, iDRAC, and device settings before OS installation.
Details various BIOS settings including System Information, Memory, Processor, and SATA configurations.
Configuration options for system boot modes (BIOS/UEFI) and network settings.
Configuration of system profiles, CPU power management, and system security features.
Information on using the Dell Lifecycle Controller and Boot Manager for system management.
Lists the essential components required for the system to power on and complete POST.
Explains system configuration validation process and common error messages.
Crucial safety guidelines and a list of necessary tools for component procedures.
Lists available After Point Of Sale (APOS) kits and their related service instructions.
Identifies and describes system board jumpers and connectors, including their locations.
Procedures for disabling system or setup passwords using the password jumper.
Explains the system status LED indicators on the front panel and their corrective actions.
Guide to running system diagnostics (ePSA) from Boot Manager or Lifecycle Controller.
To Next Page