Figure 43. Removing a NVMe drive blank
Next steps
1. Replace the NVMe drive blank.
Installing a NVMe drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. If installed, remove the front bezel.
3. Remove all drives.
4. Remove the drive backplane cover.
5. Remove the drive backplane.
CAUTION: For proper system cooling, drive blanks must be installed in all empty drive slots.
NOTE: NVMe drive blank is applicable for the system with x6 NVMe drive configuration.
Steps
Slide the NVMe drive blank into the drive slot, until clicks into place.
Installing and removing system components
81
To Next Page
Loading...
