Air shroud
Removing the air shroud
Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside the system.
3. Follow the procedure listed in Removing the expansion card risers to remove the Riser 1.
4. Remove the cables from the air shroud notch, place them on the other shroud on the other side of the system.
Steps
1. Press the latch on the air shroud.
NOTE: To remove left air shroud, press the latch on right air shroud the opposite way.
2. Hold the edges of the air shroud, and lift the air shroud out of the system.
Figure 27. Removing the left air shroud
Installing and removing system components
67
To Next Page
Loading...
