Upgrade Kits
The table lists the available After Point Of Sale [APOS] kits.
Table 77. Upgrade kits
Kits Related links to service instructions
Bezel See : Installing the front bezel
M.2 NVMe SSD See : Installing the M.2 SSD module
BOSS-N1 See : Installing the BOSS-N1 module
GPU See : GPU kit
Hard drives SSD See : Installing the drive into the drive carrier
Memory See : Installing a memory module
Network cards (Standard PCIe adapter
LP/FH)
See : Installing the LOM card and rear I/O board
Network cards (OCP) See : Installing the OCP card
PCIe SSD card See : Installing the drive carrier
Power cords Offered, but without special service instructions
Power supplies See : Installing a power supply unit
Quick sync Offered, but without special service instructions
TPM See : Upgrading the Trusted Platform Module
Processor enablement thermal kits See : Installing the processor
Internal USB 3.0 card See : Installing the internal USB card
Serial COM port daughter card See : Installing the serial COM port
Cables Offered, but without special service instructions
Heat sink See : Installing the processor and heat sink module
Risers See : Installing the expansion card risers
Rail Offered, but without special service instructions
CMA Offered, but without special service instructions
NOTE: CMA is not supported in Direct Liquid Cooling configuration.
Topics:
• BOSS-N1 module kit
• GPU kit
• Internal USB card kit
• Serial COM port kit
• VGA port kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 SSDs.
8
Upgrade Kits 181