Dell PowerEdge R7615 - Page 133

Figure 95. 24 x 2.5 inch SAS/SATA drives with 4 x 2.5 inch drives with FPERC11.
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 90. 24 x 2.5 inch SAS/SATA drives with 4 x 2.5 inch drives with FPERC11
Order From To
1 SIG_PWR_2 (system board power
connector)
BP_PWR_2 (backplane power
connector)
2 SL1_CPU1_PB2 (signal connector on
system board)
CTRL_DST_PA1 (fPERC input
connector)
3 SL3_CPU1_PB2 (signal connector on
system board)
CTRL_DST_PB1 (fPERC input
connector)
4 CTRL_SRC_SB1 (fPERC controller
connector)
BP_DST_SB1 (backplane signal
connector)
5 CTRL_SRC_SA1 (fPERC controller
connector)
BP_DST_SA1 (backplane signal
connector)
6 SL9_CPU1_PB2 (signal connector on
system board)
BP_DST_PA1 and BP_DST_PB1
(backplane signal connector)
7 SIG_PWR_1 (system board power
connector)
BP_PWR_1 (backplane power
connector)
8 SIG_PWR_0 (system board power
connector)
BP_PWR_1 (backplane power
connector)
Installing and removing system components 133