Installing, Removing, and Replacing
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
1 Target ports 1 and 2 to host(s)
2 Initiator ports 3 – 6 to drives
3 LEDs (blue, amber, green)
Use the following procedure, along with
Figure 9, if you are installing a library that includes FC tape drives that are connected
to FC I/O blades.
Figure 9 FC With I/O Blade Cabling
To Next Page
Loading...
