Installing, Removing, and Replacing
file:///T|/htdocs/stor-sys/ML6000/en/html/ch08.htm[9/17/2012 1:50:35 PM]
1 Hinge of rack ears
b Using two M5 thumbscrews, fasten the rack ear to the rack. The thumbscrews should thread through the nut clips
(or cage nuts) and fasten completely and evenly.
9 Install the left rack ear.
a With the I/E station door open, open the left door (the access door) of the module and pull the door toward you in
order to access the slot located in the lower left corner of the module. (The flexible door hinge allows the door to
be pulled away from the module, providing access to the slot.)
Note: You may need to pull the door toward you in order to access the slot.
b Install the left rack ear in the same manner as the right rack ear.
c Using two M5 thumbscrews, fasten the rack ear to the rack. The thumbscrews should thread through the nut clips
(or cage nuts) and fasten completely and evenly.
To Next Page
Loading...
