Table 22. Library error codes (continued)
Code (H) Description Panel Indication Action Required
00F1
Sensor error #2.
Accessor encoder sensor A error
detected during blink check.
Suspect the accessor encoder
sensor A.
CHK 00F1
Cycle the power supply and try again.
v If the problem is corrected, run Library Verify
before normal library operations resume.
v If the problem persists, see “Contacting Dell
technical support” on page 111.
00F2
Sensor error #3.
X encoder sensor error detected
during blink check. Suspect the X
encoder sensor.
CHK 00F2
00F3
Sensor error #4.
Magazine sensor error detected
during blink check. Suspect the
magazine sensor.
CHK 00F3
00F8
Sensor error #5.
X origin sensor error detected
during blink check. Suspect the X
origin sensor.
CHK 00F8
00F9
Sensor error #6.
Cartridge sensor error detected
during blink check. Suspect the
cartridge sensor.
CHK 00F9
00FA
Sensor error #7.
accessor forward sensor error
detected during blink check.
Suspect the accessor forward
sensor.
CHK 00FA
00FB
Sensor error #8.
accessor origin sensor error
detected during blink check.
Suspect the accessor origin sensor.
CHK 00FB
124 Dell PowerVault TL1000 Tape Autoloader: User's Guide
To Next Page
Loading...
