Dell PowerVault TL1000 - Firmware Revision; Managing the Library; Unlocking the I;O Station; Unlock I;O Station Command

v Network settings
– Worldwide node name
– IP address protocol stack
– IP address
Firmware revision
Select Service > View Firmware Revision to display the current version of the library firmware.
Managing the library
Unlocking the I/O station
Select Unlock I/O Station to unlock the I/O station. This menu option is available only when the I/O
station is enabled in the library configuration settings.
After the I/O station is closed, wait for the library to complete its inventory before you proceed with
normal library operations.
Service
ViewFirmwareRevision
Figure 51. Firmware revision
UnlockI/OStation
Figure 52. Unlock I/O station command
a29z0024
Figure 53. I/O station unlocked
54 Dell PowerVault TL1000 Tape Autoloader: User's Guide