3. Place the screws ▌11▐ into the left and right brackets.
4. Attach the left ▌3▐ and right ▌4▐ (Figure 19 on page 24) front brackets to the front of the library
chassis with 2 flat-head screws ▌8▐ on each side. Use the top two screw holes on each side. The
flange of each bracket with the inserted screws (▌11▐) fits into the cutout on each side of the bezel.
Figure 18. Rack mount screw locations for front and rear vertical rails
Installation and configuration 23
To Next Page
Loading...
