– Administrator users are allowed access to the entire physical library and logical library, including
configuration. Only one administrator user must be assigned the login name admin.
v Password indicates the status of the user's password.
– Expired: The maximum password age was exceeded. The password is now invalid.
– Unchangeable: The minimum password age was not exceeded. You cannot change the password.
– Available: The password is available to be changed.
– Locked: The maximum number of failed login attempts for the account was exceeded. An
administrator must unlock the account.
An administrator can add/modify/remove extra administrator, superuser, and user accounts, and change
passwords. User accounts are restricted to specific areas of the library. For more information, see “User
interfaces” on page 13.
A User account can be modified by an administrator to provide a user with superuser or administrator
access permissions to the library functions.
Enter all user IDs and passwords on the Library Configuration form in Appendix D, “Library
Configuration Form,” on page 145.
Click Submit to transfer the settings to the library. A dialog message is displayed when the settings are
updated successfully.
Click Refresh to read the current settings from the library.
Configuring Password Rules Settings
The Password Rules tab displays the rules for user passwords.
v Minimum number of characters - Choose the minimum password length. The factory default value is
8. The maximum password length is 16.
v Minimum number of upper case alphabetic characters (A-Z) - Choose the minimum number of
uppercase alphabetic characters. The factory default value is 1.
Figure 44. Password Rules screen
44 Dell PowerVault TL1000 Tape Autoloader: User's Guide
To Next Page
Loading...
