Operations
“The Operator Panel” on
page 52
Monitoring the Library “Configuration settings” on page 53
“Current information” on page 53
“Firmware revision” on page 54
Managing the Library “Unlocking the I/O station” on page 54
“Unlocking the cartridge magazine” on page 55
“Moving cartridges” on page 55
“Unloading the drive” on page 55
“Cleaning the drive manually” on page 56
“Conducting a library inventory” on page 56
“Taking the library online and offline” on page 56
“Powering down the library” on page 57
“Shipping the library” on page 57
“Rebooting the drive” on page 57
“Rebooting the library” on page 57
“Logging out of the library” on page 58
Configuring the Library “Configuring auto cleaning” on page 58
“Configuring the number of active slots” on page 58
“Configuring the library access mode” on page 59
“Configuring date and time settings” on page 60
“Configuring network settings” on page 61
“Configuring Operator Panel settings” on page 62
“Configuring Web GUI Settings” on page 62
“Setting the library to factory defaults” on page 63
Servicing the Library “Checking the library error status” on page 63
“Running library verify diagnostic procedures” on
page 63
“Running drive diagnostic procedures” on page 64
51
To Next Page
Loading...
