– IP addresses
– DHCP (Enabled or Disabled)
– Subnet mask
– Gateway address
– Library worldwide node name
– MAC address
– Link speed
– NTP server
– SNMP trap
– Email address
v Cartridge
– Cartridge label that is detected by the bar code reader
– Encryption setting (for data cartridges)
– Media status (OK, Degraded, or Failed)
– Remaining uses for cleaning cartridges. When a cleaning cartridge is added to the library (I/O
station or cleaning slot) the remaining uses is displayed as 50. The actual remaining uses are
updated when the cleaning cartridge is loaded into the tape drive. See “Cleaning cartridge” on page
95.
v Column n, Tier n
– Slot type (Storage, I/O station, or Cleaning)
– Element address
v Drive information
– Status (OK, Degraded, or Failed). Drive Status displays Empty, Loading, or Ejected when the drive
is empty, loading media, or media is ejected/unloaded in the drive. It displays Cleaning when the
cleaning cartridge is in the drive, and Initializing while initializing.
– Vendor ID
– Product ID
– Firmware version
– Serial number
– Worldwide node name
– Encryption capability
– Drive event
– Cartridge information
v Accessor information
– Status (OK, Degraded, or Failed)
– Accessor event
68 Dell PowerVault TL1000 Tape Autoloader: User's Guide
To Next Page
Loading...
