Dell Precision 3430 Small Form Factor - A Dust Filter for Dell Precision 3430 Small Form Factor

Dust Filter for Dell Precision 3430 Small Form
Factor
The dust lter for the Dell Precision 3430 Small Form Factor helps protect the system from ne dust particles. After installation of the dust
lter, the BIOS can be enabled to generate a preboot reminder to clean or replace the dust lter based on the time interval set.
Follow these steps to install the dust lter:
1 Align the plastic tabs of the dust lter to the slots on the system chassis and gently press to ensure that the dust lter ts rmly onto
the system.
2 To remove the dust lter:
a With the help of a plastic scribe, gently pry the edge from the bottom to loosen the dust lter [1].
b Remove the dust lter from the system chassis [2].
A
Dust Filter for Dell Precision 3430 Small Form Factor 89