Dell S3425DW - Connecting Your Monitor; Connecting the USB-C to C Cable; Connecting the HDMI Cable (Purchased Separately)

32
Setting up the monitor
Connecting your monitor
WARNING: Before you begin any of the procedures in this section, follow the Safety instructions.
NOTE: Dell monitors are designed to work optimally with the Dell-supplied cables inside the box. Dell does not guarantee the
video quality and performance if non-Dell cables are used.
NOTE: Route the cables through the cable management guide before connecting them.
NOTE: Do not connect all the cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The appearance of the computer may vary.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2.
Connect the USB-C or HDMI cable (purchased separately) from your monitor to the computer.
Connecting the USB-C to C cable
Figure 18. Connecting the USB-C to C cable
Connecting the HDMI cable (purchased separately)
Figure 19. Connecting the HDMI cable
3.
Plug the power cables from your computer and monitor into a nearby outlet.
Figure 20. Connecting the power cable
4.
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Common problems.