56
Operating the monitor
OSD warning message
When the monitor does not support a particular resolution mode, the following message appears:
Figure 39. Warning message of not supported resolution mode
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor specifications
for the Horizontal and Vertical frequency ranges addressable by this monitor.
NOTE: The recommended mode is 3440 x 1440.
When you adjust the Brightness level above the default level for the first time, the following message appears:
Figure 40. Warning message of adjusting the Brightness
NOTE: If you select Yes, the message does not appear the next time you change the Brightness setting.
You will see the following message before the Lock function is activated:
Figure 41. Warning message of activating the Lock function
NOTE: The message may slightly vary according to the selected settings.
To Next Page
Loading...
