34
Setting up the monitor
Securing your monitor using Kensington lock (optional)
The security-lock slot is located at the bottom of the monitor (see Security-lock slot). Secure your monitor to a table using the
Kensington security lock.
For more information on using the Kensington lock (sold separately), see the documentation that is shipped with the lock.
Figure 24. Using Kensington lock
NOTE: The image is for the purpose of illustration only. The appearance of the lock may vary.
Removing the monitor stand
NOTE: To prevent scratches on the LCD screen when removing the stand, ensure that the monitor is placed on a soft surface and
handle it carefully.
NOTE: The following steps are specifically for removing the stand that is shipped with your monitor. If you are removing a stand
that you purchased from any other source, follow the setup instructions that are included with the stand.
NOTE: Before removing the stand, ensure that you have disconnected all the cables from the monitor.
To remove the stand:
1.
Place the monitor on a soft cloth or cushion.
2.
Press and hold the stand release button at the back of the display.
3.
Lift the stand assembly up and away from the monitor.
Figure 25. Removing the monitor stand
To Next Page
Loading...
