15
Connecting your wireless headset to your devices
Connecting the headset to your device using Bluetooth
1. Turn on Bluetooth in your smartphone, tablet, or laptop before connecting the headset through Bluetooth.
Figure 14. Turning on Bluetooth
2. Press the power button to turn on the headset. Then press and hold the power button for 3 seconds to start pairing. You hear a
Bluetooth pairing voice prompt and the power LED begins rapidly flashing in blue.
Figure 15. Turning on the headset and power LED rapidly flashing blue
3. Connect the headset to a smartphone, tablet, or laptop. The power LED lights blue for 3 seconds before changing to slowly flashing
blue. You hear a device connected voice prompt.
Figure 16. Power LED slowly flashing blue
To Next Page
Loading...
