Dell X1000 Series

194 Network Administration: Spanning Tree and LAG
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_STP.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
• Add — Add these VLANS to the MST instance.
•
Remove — Remove these VLANS from the MST instance.
MSTP Instance Settings
To configure MSTP instances:
1
Click Network Administration > Spanning Tree and LAG > MSTP
Instance Settings
.
The MSTP instances and their associated VLANs are displayed.
2 Select an Instance ID .
3 Enter the Bridge Priority (0-61440) of this bridge for the selected MSTP
instance.
4 The following fields are displayed:
–
Included VLANs — Displays VLANs included in this instance.
–
Designated Root Bridge ID — Priority and MAC address of the Root
Bridge for the MST instance.
–
Root Port — Root port of the selected instance.
–
Root Path Cost — Root path cost of the selected instance.
–
Bridge ID — Bridge priority and the MAC address of this switch for
the selected instance.
–
Remaining Hops — Number of hops remaining to the next
destination.
MSTP Interface Settings
To assign interfaces to MSTP instances:
1
Click Network Administration > Spanning Tree and LAG > Spanning
Tree
> MSTP Interface Settings .
MSTP interface settings for the selected instance is displayed.
2 Click Edit .
3 Select an instance, and enter the fields:
–
Interface — Assign either ports or LAGs to the selected MSTP
instance.