Dell X1000 Series

Network Administration: Multicast 299
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_Multicast.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
2 Select either Ports or LAGs in the View By drop-down menu.
3 To modify the forwarding action for an interface, click Edit .
4 Select an interface, click its Edit icon and enter the fields.
•
Unregistered Multicast — Select the forwarding status of the selected
interface. The possible options are:
•
Forwarding — Enables forwarding of unregistered Multicast
frames on the selected port or port-channel.
•
Filtering — Enables filtering of unregistered Multicast frames on
the selected VLAN interface.
Multicast TV VLAN
This section describes the Multicast TV VLAN feature.
It contains the following sections:
• Multicast TV VLAN Overview
• Multicast TV VLAN Membership
• Multicast TV VLAN Mapping
Multicast TV VLAN Overview
The Multicast TV VLAN feature provides the ability to supply Multicast
transmissions to Layer 2-isolated subscribers, without replicating the
Multicast transmissions for all subscriber VLANs. The subscribers are the
only receivers of the Multicast transmissions.
• A Multicast TV VLAN can be defined for an Access port (a port that is
in Access mode for VLAN membership).
• All static VLANs are permitted to be a Multicast-TV VLAN.
• The configuration is performed per port.
One or more IP Multicast address groups can be associated with a Multicast
VLAN. The source port must belong to the Multicast VLAN.
Receiver ports can belong to a single user VLAN and additionally to one
Multicast VLAN. The receiver port can be an untagged member of any
VLAN, other than the defined Multicast VLAN. A receiver port can only
receive traffic from and not send traffic to the Multicast VLAN. It can send