Dell X1000 Series

Network Administration: Route Settings 215
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_RouteSettings.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
13
Network Administration: Route
Settings
This section describes configuring route settings on the device.
It covers the following topics:
• System Routing Mode
• IPv4 Route Settings
• IPv6 Route Settings
System Routing Mode
This section covers the following topics:
• System Routing Mode
System Routing Mode
Some devices automatically support Layer 2 and Layer 2+Static Routing
mode (X1052/P and X4012). Other devices can be specifically placed in either
Layer 2 mode or Layer 2+ mode (X1008/P, X1018/P and X1026/P).
To set the system mode of the for devices where this is possible:
1
Click Network Administration > Route Settings > IPv4 Route Settings
> System Routing Mode
.
2 Click Edit .
3 Select either Layer 2 or Layer 2+ Static Routing.
IPv4 Route Settings
This section covers the following topics:
• IPv4 Routes Table