Dell X1000 Series

66 Dashboard
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Dashboard.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
– Flow Control — Select to enable or disable flow control.
5 Click Next to view a summary of the port configuration.
6 Click Apply to save the changes.
Configure VLAN
The following processes can be performed in this wizard.
Configure VLAN
To add a VLAN:
1
Select Configure VLAN .
2 Click Next and Add .
3 Enter the following fields:
–
VLAN ID — Enter the number of the VLAN.
–
VLAN Name — Enter the name of the VLAN.
–
Authentication Required — Enable/disable Dot1x authentication.
4 Click OK .
5 Click Next to view the VLAN.
6 Click Apply to save the changes.
Configure and Assign Ports to VLAN
To add ports to a VLAN:
1
Select Configure and Assign Ports to VLAN .
2 Click Next .
3 Click on ports to be included in VLAN.
4 Enter the following fields:
–
Port Edit Mode — Select whether you are going to configure the port
or clear all existing VLAN configurations from the selected ports.
–
Port VLAN Mode — Select either Access , General or Trunk . See Port
Modes.
–
Assign Select Ports to VLAN and Port Tag Membership — Select
either
All Future VLANs (for trunk ports) or the specific VLANs to
which the port will be assigned.
5 Click OK .