Dell X1000 Series

Dashboard 65
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Dashboard.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
• Ingress Filtering — Displays whether there is ingress filtering on the
ports in the LAG.
2 Select Configure LAG .
3 Click Next .
4 Click on the Edit icon of a LAG and enter the following fields:
–
LAG — Displays the number of the LAG
–
LAG Mode — Select one of the following modes:
•
Static — User-defined LAG.
•
LACP — LACP-defined LAG
–
Description — Enter descriptive text.
–
LAG Type — Displays the port types that comprise the LAG.
–
Admin Status — Select status of LAG (Up or Down).
–
Admin Speed — Select speed of LAG.
–
Auto Negotiation — Enable/disable auto negotiation.
–
Auto Negotiation — Enable/disable auto negotiation.
–
Admin Advertisement — Check the auto-negotiation setting the port
advertises. The possible options are:
•
Max Capability — The port advertises all the options that it can
support.
•
10 Half — The port advertises for a 10 mbps speed port and half
duplex mode setting.
•
10 Full — The port advertises for a 10 mbps speed port and full
duplex mode setting.
•
100 Half — The port advertises for a 100 mbps speed port and
half duplex mode setting.
•
100 Full — The port advertises for a 100 mbps speed port and full
duplex mode setting.
•
1000 Full — The port advertises for a 1000 mbps speed port and
full duplex mode setting.
–
Neighbor Advertisement — Displays the neighboring port’s
advertisement settings. The field values are identical to the
Admin
Advertisement
field values.