Dell X1000 Series

34 Hardware Description
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Hardware.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Device Models
The X1000 and X4000 devices switches combine versatility with minimal
management requirements. This series includes PoE-powered and PoE-
enabled (name contains P) devices of the following types:
• X1008 — 8 10/100/1000BASE-T ports with single PoE PD port. Port 8 is
the PD port; the X1008 can be powered from the external power supply or
from PoE power.
•
X1008P — 8 10/100/1000BASE-T ports with 8 PoE PSE ports
•
X1018 — 16 10/100/1000Base-T port and 2 1GbE SFP ports
•
X1018P — 16 10/100/1000BASE-T ports with 16 PoE PSE ports and 2
1GbE SFP ports
•
X1026 — 24 10/100/1000BASE-T ports and 2 1GbE SFP ports
•
X1026P — 24 10/100/1000BASE-T ports with up to 24 PoE ports or 12
PoE+ ports (up to 360W) and 2 SFP ports
•
X1052 — 48 10/100/1000BASE-T ports and 4 10GbE SFP+ ports
•
X1052P — 48 10/100/1000BASE-T ports with up to 24 PoE ports or 12
PoE+ ports (up to 360W) and 4 10GbE SFP+ ports
•
X4012 — 12 10GE SFP+ ports
The following are supported on all devices:
•Micro USB (console)
This port is used for a terminal connection for debugging and software
downloads. The baud rate is 9,600 BPS. This port can operate as a UART
in USB mode (connected to a PC USB port) or in RS-232 mode
(connected to a PC Serial port).
• USB Port Type-A (storage)
This port is used to upgrade or backup files from a USB device.