Dell X1000 Series

CLI 369
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
no power inline usage-threshold
Parameters
percent—Specifies the threshold in percent to compare to the measured power.
(Range: 1–99)
Default Configuration
The default threshold is 95 percent.
Command Mode
Global Configuration mode
Example
The following example configures the threshold for initiating inline power
usage alarms to 90 percent.
Console(config)# power inline usage-threshold 90
reload
The reload Privileged EXEC mode command reloads the operating system at a
user-specified time.
Syntax
reload [in [hhh:mm | mmm] | at hh:mm [day month]] | cancel]
Parameters
• in hhh:mm | mmm - Schedules a reload of the software to take effect in
the specified minutes or hours and minutes. The reload must take place
within approximately 24 days.
•
at hh:mm - Schedules a reload of the software to take place at the specified
time (using a 24-hour clock). If you specify the month and day, the reload
is scheduled to take place at the specified time and date. If you do not
specify the month and day, the reload takes place at the specified time on
the current day (if the specified time is later than the current time) or on