Dell X1000 Series - Page 266

266 Network Administration: Security
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_Security.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
• RVSP — Matches the packet to the ReSerVation Protocol
(RSVP).
•
AH — Authentication Header (AH). Provides source host
authentication and data integrity.
•
EIGRP — Enhanced Interior Gateway Routing Protocol
(EIGRP). Provides fast convergence, support for variable-length
subnet mask, and supports multiple network layer protocols.
•
OSPF — The Open Shortest Path First (OSPF) protocol is a
link-state, hierarchical interior gateway protocol (IGP) for
network routing Layer Two (2) Tunneling Protocol, an extension
to the PPP protocol that enables ISPs to operate Virtual Private
Networks (VPNs).
•
IPIP — IP over IP (IPinIP). Encapsulates IP packets to create
tunnels between two routers. This ensures that the IPIP tunnel
appears as a single interface, rather than several separate
interfaces. IPIP enables tunnel intranets occur the internet, and
provides an alternative to source routing.
•
PIM — Matches the packet to Protocol Independent Multicast
(PIM).
•
L2TP — Matches the packet to Internet Protocol (L2IP).
•
ISIS — Intermediate System - Intermediate System (ISIS).
Distributes IP routing information throughout a single
autonomous system in IP networks.
–
Protocol ID To Match — Enter a protocol number if you did not
select a protocol by name.
–
Any (IP) — Check to use any protocol.
–
Source Port — Enter the TCP/UDP source port. Enter either Single ,
Range or select Any to include all ports.
–
Destination Port — Enter the TCP/UDP destination port. Enter
either a
Single , Range or select Any to include all ports.