288 Network Administration: SNMP Monitoring
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_SNMP.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
–
Notification Version
— The message trap SNMP version (v1 or v2).
If SNMPv3 is used to send and receive traps, enter the fields:
–
User Name
— The user to whom SNMP notifications are sent.
–
Security Level
— The means by which the packet is authenticated.
The possible options are:
•
No Authentication
— The packet is neither authenticated nor
encrypted.
•
Authentication
— The packet is authenticated.
•
Privacy
— The packet is both authenticated and encrypted.
3
Enter the fields for all versions of SNMP:
–
UDP Port (1-65535)
— The UDP port used to send notifications. The
default is 162.
–
Filter Name
— Select an SNMP filter from a list of previously-defined
SNMP filters.
–
Timeout (1-300)
— The amount of time (seconds) the device waits
before resending informs.
–
Retries (1-255)
— The amount of times the device resends an inform
request.
To Next Page
Loading...
