Dell X1000 Series

Dashboard 61
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Dashboard.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
– Re-Activate Suspended Port(s) —Select Enabled to reactive a port if
the port has been disabled through the locked port security option or
Disabled to leave it down.
5 Click Next .
6 Depending on the type of port being configured, enter the following fields:
Copper 10/100/1000MBase-T Ports
– Ports — Port numbers.
–
Port Type — Port type.
–
Admin Speed — Select the configured rate for the port. The port type
determines the available speed setting options. You can designate
Administrative Speed only when port auto-negotiation is disabled.
–
Admin Duplex Mode — Select the port duplex mode (this is only
possible if Auto Negotiation is not enabled). The options are:
•
Full — The interface supports transmission between the device
and the client in both directions simultaneously.
•
Half — The interface supports transmission between the device
and the client in only one direction at a time.
–
Auto Negotiation — Select to enable/disable auto-negotiation on the
port. Auto-Negotiation enables a port to advertise its transmission
rate, duplex mode, and Flow Control abilities to other devices.
–
Admin Advertisement — Check the auto-negotiation setting the port
advertises. The possible options are:
•
Max Capability — The port advertises all the options that it can
support.
•
10 Half — The port advertises for a 10 mbps speed port and half
duplex mode setting.
•
10 Full — The port advertises for a 10 mbps speed port and full
duplex mode setting.
•
100 Half — The port advertises for a 100 mbps speed port and
half duplex mode setting.
•
100 Full — The port advertises for a 100 mbps speed port and full
duplex mode setting.