Chapter 8 Option CardsC2000
8-34
8-14 CMC-EIP01 -- Communication card, EtherNet/IP
8-14-1 Features
1. Supports Modbus TCP and Ethernet/IP protocol
2. Supports all parameters read/write (use with EIP V.1.06)
3. MDI/MDI-X auto-detect
4. Baud rate: 10/100Mbps auto-detect
5. AC motor drive keypad/ Ethernet configuration
6. Virtual serial port
8-14-2 Product Profile
[Figure1]
1. Screw fixing hole
2. Positioning hole
3. AC motor drive connection
port
4. LINK indicator
5. RJ-45 connection port
6. POWER indicator
7. Alignment groove
8-14-3 Specifications
Network Interface
Interface
RJ-45 with Auto MDI/MDIX
Number of ports
1 Port
Transmission method
IEEE 802.3, IEEE 802.3u
Transmission cable
Category 5e shielding 100M
Transmission speed
10/100 Mbps Auto-Detect
Network protocol
ICMP, IP, TCP, UDP, DHCP, HTTP, SMTP, MODBUS over TCP/IP, EtherNet/IP, Delta
Configuration
Electrical Specification
Weight
25g
Insulation voltage
500V
DC
Power consumption
0.8W
Power supply voltage
5V
DC
(provided by VFD-C2000)
To Next Page
Loading...
