Delta C2000 Series - Page 315

Chapter 10 Digital KeypadC2000
10-18
Press to setting menu.
After selecting a setting value. Press
ENTER to see screen’s display after
contrast is adjusted to be +10.
When the setting value is 0 Min, the
backlight will be steady on.
Then press ENTER.
After select a setting value Press ENTER to
see screen’s display result after contrast is
adjusted to be -10.
2. Back-light
Press ENTER to go to “Back Light Time
Setting” screen.
Use Up / Down key to adjust the setting
value.
When the setting value is 0 Min, the
backlight will be steady on.
When the setting value is 10 Min, the
backlight will be off in 10 minutes.
3. Text Color
Press ENTER to go to Text Color Setting
screen.
The default value is White Text.
Use Up / Down key to adjust the setting
value.
1:
2:
3:
The setting value changes to Blue Text.