Delta C2000 Series - Page 562

Chapter 12 Description of Parameter SettingsC2000
12.1-09-17
 Setting 1: The DeviceNet communication rate can be the same as that for CANopen (setting
0–8).

Communication Card IP Configuration (for MODBUS TCP)
Default: 0
Settings 0: Static IP
1: Dynamic IP (DHCP)
 Setting 0: Set the IP address manually.
 Setting 1: IP address is automatically set by the host controller.

Communication Card IP Address 1 (for MODBUS TCP)

Communication Card IP Address 2 (for MODBUS TCP)

Communication Card IP Address 3 (for MODBUS TCP)

Communication Card IP Address 4 (for MODBUS TCP)
Default: 0
Settings 0–65535
 Use Pr. 09-76–09-79 with a communication card.

Communication Card Address Mask 1 (for MODBUS TCP)

Communication Card Address Mask 2 (for MODBUS TCP)

Communication Card Address Mask 3 (for MODBUS TCP)

Communication Card Address Mask 4 (for MODBUS TCP)
Default: 0
Settings 0–65535

Communication Card Gateway Address 1 (for MODBUS TCP)

Communication Card Gateway Address 2 (for MODBUS TCP)

Communication Card Gateway Address 3 (for MODBUS TCP)

Communication Card Gateway Address 4 (for MODBUS TCP)
Default: 0
Settings 0–65535

Communication Card Password (Low word) (for MODBUS TCP)

Communication Card Password (High word) (for MODBUS TCP)
Default: 0
Settings 0–99

Reset Communication Card (for MODBUS TCP)
Default: 0
Settings 0: Disable
1: Reset, return to default