Delta C2000 Series - Page 93

Chapter 5 Main Circuit TerminalsC2000
5-14
Frame E
R/L1 T/L3 V/T2S/L2 U/T1 W/T3
 If you install at Ta 50°C (for 230V / 460V model names with last digit A; for 690V model names end
with 63B-00)
/ 40°C (for 230V / 460V model names with last digit A; for 690V model names end
with 63B-21)
environment, please select copper wire with voltage rating 600V and temperature
resistant at 75°C or
90°C.
 If you install at Ta 50°C (for 230V / 460V model names with last digit A; for 690V model names end
with 63B-00)
/ 40°C (for 230V / 460V model names with last digit A; for 690V model names end
with 63B-21) above environment, please select copper wire with voltage rating 600V and
temperature resistant at 90°C or above.
 For UL installation compliant, please use copper wires for installation, the wire gauge is based on
temperature resistant at 75°C which is requested and recommended from UL. Do not reduce the
wire gauge when using higher temperature wire.
Model Name
Main Circuit Terminals
R/L1, S/L2, T/L3, U/T1, V/T2, W/T3, -/DC-, +1/DC+
Terminal
Max. Wire
Gauge
Min. Wire Gauge
Screw Spec.
and Torque
(±10%)
Max. Wire
Gauge
Min. Wire Gauge
Screw Spec.
and Torque
(±10%)
VFD450C23A
120mm
2
*2
[4/0 AWG*2]
50 mm
2
*2 [1/0 AWG*2]
M8
180kg-cm
[156.2 lb-in.]
[17.65 Nm]
50mm
2
*2
[1/0 AWG*2]
50 mm
2
*1 [1/0 AWG*1]
M8
180kg-cm
[156.2 lb-in.]
[17.65Nm]
VFD550C23A 95 mm
2
*2 [3/0 AWG*2]
95mm
2
*2
[3/0 AWG*2]
95 mm
2
*1 [3/0 AWG*1]
VFD750C23A 120 mm
2
*2 [4/0 AWG*2]
120mm
2
*2
[4/0 AWG*2]
120 mm
2
*1 [4/0 AWG*1]
VFD900C43A 50 mm
2
*2 [1/0 AWG*2]
50mm
2
*2
[1/0 AWG*2]
50 mm
2
*1[1/0 AWG*1]
VFD1100C43A 95 mm
2
*2 [3/0 AWG*2]
95mm
2
*2
[3/0 AWG*2]
95 mm
2
*1 [3/0 AWG*1]
VFD450C23E 50 mm
2
*2 [1/0 AWG*2]
50mm
2
*2
[1/0 AWG*2]
50 mm
2
*1 [1/0 AWG*1]
VFD550C23E 70 mm
2
*2 [2/0 AWG*2]
70mm
2
*2
[2/0 AWG*2]
70 mm
2
*1 [2/0 AWG*1]
VFD750C23E 95 mm
2
*2 [3/0 AWG*2]
95mm
2
*2
[3/0 AWG*2]
95 mm
2
*1 [3/0 AWG*1]
VFD900C43E 50 mm
2
*2 [1/0 AWG*2]
50mm
2
*2
[1/0 AWG*2]
50 mm
2
*1 [1/0 AWG*1]
VFD1100C43E 70 mm
2
*2 [2/0 AWG*2]
70mm
2
*2
[2/0 AWG*2]
70 mm
2
*1 [2/0 AWG*1]
VFD750C63B-00 25 mm
2
*2 [4 AWG*2]
25 mm
2
*2
[4 AWG*2]
25 mm
2
*1 [4 AWG*1]
VFD900C63B-00
35 mm
2
*2 [2 AWG*2]
35 mm
2
*2
[2 AWG*2]
35 mm
2
*1 [2 AWG*1]
VFD1100C63B-00
VFD1320C63B-00 50 mm
2
*2 [1/0 AWG*2]
50 mm
2
*2
[1/0 AWG*2]
50 mm
2
*1 [1/0 AWG*1]
VFD750C63B-21 25 mm
2
*2 [4 AWG*2]
25 mm
2
*2
[4 AWG*2]
25 mm
2
*1 [4 AWG*1]
VFD900C63B-21
35 mm
2
*2 [2 AWG*2]
35 mm
2
*2
[2 AWG*2]
35 mm
2
*1 [2 AWG*1]
VFD1100C63B-21
VFD1320C63B-21 50 mm
2
*2 [1/0 AWG*2]
50 mm
2
*2
[1/0 AWG*2]
50 mm
2
*1 [1/0 AWG*1]