Delta ME300 Series - Page 163

Chapter 11 Summary of Parameter SettingsME300
11-10
Pr. Explanation Settings Default

01-38
Mid-point voltage 1 of
motor 2
115 / 230V models: 0.0–240.0 V
460V models: 0.0–480.0 V
11.0
22.0
01-39
Mid-point frequency 2 of
motor 2
0.00–599.00 Hz 0.50

01-40
Mid-point voltage 2 of
motor 2
115 / 230V models: 0.0–240.0 V
460V models: 0.0–480.0 V
2.0
4.0
01-41
Minimum output
frequency of motor 2
0.00–599.00 Hz 0.00

01-42
Minimum output voltage
of motor 2
115 / 230V models: 0.0–240.0 V
460V models: 0.0–480.0 V
0.0
0.0
01-43 V/F curve selection
0: V/F curve determined by Pr.01-00–01-08
1: V/F curve to the power of 1.5
2: V/F curve to the power of 2
0

01-44
Auto-acceleration and
auto-deceleration setting
0: Linear acceleration and deceleration
1: Auto-acceleration and linear deceleration
2: Linear acceleration and auto-deceleration
3: Auto-acceleration and auto-deceleration
4: Stall prevention by auto-acceleration and auto-
deceleration (limited by Pr.01-12–01-21)
0
01-45
Time unit for acceleration
/ deceleration and S-
curve
0: Unit 0.01 sec.
1: Unit 0.1 sec.
0
01-49
Deceleration method
selection
0: Normal deceleration
1: Over-voltage energy restriction
2: Traction energy control (TEC)
0
01-52
Maximum operation
frequency of motor 2
0.00–599.00 Hz
60.00/
50.00