Delta ME300 Series User Manual

Chapter 12 Description of Parameter Settings
ME300
12.1-02-3
19: Digital up command
20: Digital down command
21: PID function disabled
22: Clear the counter
23: Input the counter value (MI4)
24: FWD JOG command
25: REV JOG command
28: Emergency stop (EF1)
29: Signal confirmation for Y-connection
30: Signal confirmation for ∆-connection
38: Disable writing EEPROM function
40: Force coasting to stop
41: HAND switch
42: AUTO switch
49: Enable Drive
50: Slave dEb action to execute
56: Local / Remote selection
58: Enable fire mode (with RUN command)
59: Enable fire mode (without RUN command)
69: Auto-activate preheating command
70: Force auxiliary frequency return to 0
71: Disable PID function, force PID output return to 0
72: Disable PID function, retain the output value before disabled
73: Force PID integral gain return to 0, disable integral
74: Reverse PID feedback
77: PLC Program Running
78: PLC Program Step Completed
79: PLC Program Completed
80: PLC Operation Paused
83: Multi-motors (IM) selection bit 0
94: Programmable AUTO RUN
95: Pausing AUTO RUN
97: Multi-pumps switch by Hand / Auto mode
98: Simple positioning stop by forward limit
99: Simple positioning stop by reverse limit
 This parameter selects the functions for each multi-function terminal.
 When Pr.02-00 = 0, you can set multi-function options with the multi-function input terminals MI1,
MI2.
 When Pr.02-00 ≠ 0, the multi-function input terminals MI1, MI2 work in accordance with the
setting values for Pr.02-00.

Delta ME300 Series Specifications

General

Power Rating	0.4 kW ~ 110 kW
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Communication	RS-485
Storage Temperature	-20-60°C
Dimensions	Varies by model
Weight	Varies by model
Input Voltage	3-phase 220VAC
Humidity	90% RH, non-condensing