Delta RPI M6A

8 Settings
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
68
8.4 Date and Time
Overview
With this function you can set date and time.
► For a precise calculation of the statistics in the inverter itself and in a monitoring system, date and time have to be
correct.
Accessing the menu
Main menu > General settings > Date & Time
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. When the default information is displayed, press any button to open the main menu. Oth-
erwise, repeatedly press the button
ESC
until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the buttons and to select General Settings.
To conrm your selection, press the button
ENT
.
Baud rate
Date & Time
Language
3. Use the buttons and to select Date & time.
To conrm your selection, press the button
ENT
.
10.Sep 2014 14:55
4. Use the buttons and to change the currently marked (underlined) value.
When nished, press the button
ENT
.
→ The marking moves to the next value.
Congurable Parameters
Parameter Description Value range
-
Date and Time –