Delta RPI M6A

69
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
8 Settings
8.5 Baud rate for RS485
Overview
With this function you can set the baud rate for the RS485 connection.
► If you connect multiple inverters via RS485, set the same baud rate on each inverter.
Accessing the menu
Main menu > General settings > Baud rate
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. When the default information is displayed, press any button to open the main menu. Oth-
erwise, repeatedly press the button
ESC
until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the buttons and to select General Settings.
To conrm your selection, press the button
ENT
.
Baud rate
Date & Time
Language
3. Use the buttons and to select Baud rate.
To conrm your selection, press the button
ENT
.
38400
19200
9600
4. Use the buttons and to select a baud rate.
To conrm your selection, press the button
ENT
.
Congurable Parameters
Parameter Description Value range
Baud rate
Sets the baud rate for the RS485 connection.
9600 | 19200 | 38400