Delta RPI M6A User Manual

8 Settings
Installation and Operation Manual for RPI M6A M8A M10A inverters V1.0 2016-02-03
80
8.9 Dry contacts
Overview
With this function you can apply an event to the dry contacts.
Accessing the menu
Main menu > Install Settings > Grid settings > P Ramp Up
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. When the default information is displayed, press any button to open the main menu. Oth-
erwise, repeatedly press the button
ESC
until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the buttons and to select Install Settings.
To conrm your selection, press the button
ENT
.
Password: * * * *
energy production
Adj. would effect
Warning:
3. The menu is protected by password 5555. Use the buttons and to set each digit.
To conrm a digit, press the button
ENT
.
Grid Settings
DC Injection
Dry Cont. Disable
RCMU: ON
EPO: Normal Close
4. Use the buttons and to select Dry Contact.
To conrm your selection, press the button
ENT
.
On Grid
Fan Fail
Insulation
Disable
5. Use the buttons and to select an option.
To conrm your selection, press the button
ENT
.
Congurable Parameters
Parameter Description Value range
Dry cont.
Applies an event to the selected dry contact.
Disabled | On Grid | Fan Fail |
Insulation | Alarm | Error |
Fault | Warning

Delta RPI M6A Specifications

General

Brand	Delta
Model	RPI M6A
Category	Inverter
Language	English