28
Preparing for Installation
3. Preparing for Installation
3.1 Instruction before Installing
Due to the variety of user installation environments, reading the manual thoroughly before installa-
tion is strongly recommended. All the installation and start-up procedures must be undertaken by
a professional and well-trained technician.
3.2 Checking the Package
There might be some unpredictable situations during transportation. Please check if there is any
damage to the cardboard carton. After opening the package, please check both the outer case
and inner part of this inverter as below.
1. Check the right side on the inverter case to ensure the model number and the specication is
the same with the model you have purchased.
2. Check if there are any loose components.
3. Check if all the accessories are in the package, the standard accessories are listed in the
below table:
Item Quantity Description
10 TL, 15 TL, 20 TL, or 30 TL
Solar Inverter
1 10 kVA,15 kVA, 20 kVA, or 30 kVA solar inverter
User Manual 1 User installation and operation instructions
AC Plug 1 Connector for AC connection
Mounting Bracket 1 Bracket to install the inverter on the wall
Table 3.1.: Packing List
NOTE
When there is outer or inner damage on the inverter or there is any missing
or damaged standard accessories, please contact your inverter supplier for
support.
To Next Page
Loading...
