Denon AVR-4308 User Manual


Getting Started Setup Playback Remote Control Multi-Zone Information Troubleshooting
ENGLISH
3- 3-
065 */065
015*$"-
*/
"6%*0
"6%*0
R
L
R
L
R
L
R
L
CD Recorder / MD Recorder / Tape Deck
Make analog connections if you wish to record analog audio signals, or digital connections if you wish to
record digital audio signals, depending on the types of connectors on the components being used.
CD recorder /
MD recorder / Tape deck
NOTE
Do not connect the output of the component connected to the AVR-4308’s OPTICAL3 output connector to
any input connector other than OPTICAL3.
or
Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
Connections to Other Devices
%&/0/-*/,
"6%*0
Components Equipped with a DENON LINK connector
Multi-channel playback is possible with DVD-Audio discs, Super Audio CD, etc.
DVD player
To use with DENON LINK connections, make the settings at GUI menu “Source Select” – “Assign” –
“Digital” – “DENON LINK” (vpage 41).
Connections
1.AVR4308E2_ENG_3.indd 17 2007/10/26 11:41:24

Denon AVR-4308 Specifications

General

Number of Channels	7.1
HDMI Inputs	4
HDMI Outputs	2
Networking	Ethernet, Wi-Fi
Multi-room Zones	3
THX Certified	No
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Total Harmonic Distortion	0.05%
Input Sensitivity/Impedance	200 mV / 47 kOhms
Signal-to-Noise Ratio	102 dB
HDMI Version	1.3a
Dolby Technologies	Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Pro Logic IIx
DTS Technologies	DTS, DTS-ES, DTS 96/24, DTS-HD Master Audio
Tuner Frequency Range	FM: 87.5 MHz - 108.0 MHz, AM: 522 kHz - 1611 kHz
Audio Inputs/Outputs	Analog, Digital Coaxial, Digital Optical, HDMI