Denon AVR-4310CI - Input Source Management: Video and Input Mode; Video and Input Mode Settings


Getting Started Connections Playback Remote ControlMulti-zone Information Troubleshooting Specifi cations
Making the Input Settings (Source Select)
Setting items Setting contents
HDMI
HDMI
Set this to change the HDMI
input terminals assigned to
the input sources.
The
DVD HDP TV SAT/CBL VCR DVR V.AUX
input sources
are assigned to the HDMI input terminals as shown below.
HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 / HDMI 5 / HDMI 6
None : Do not assign an HDMI input terminal to the selected input
source.
Upon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV
SAT/
CBL
VCR DVR V.AUX
Default
setting
HDMI
1
HDMI
2
None
HDMI
3
HDMI
4
HDMI
5
HDMI
6
An input source to which an HDMI input terminal cannot be assigned is
displayed as “– – –”.
To play the video signal assigned at “HDMI” combined with the audio
signal assigned at “Input Assign“ – “Digital”, select “Digital” at “Input
Mode” (vpage 49).
When the AVR-4310CI and monitor are connected with an HDMI cable,
if the monitor is not compatible with HDMI audio signal playback, only
the video signals are output to the monitor.
The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
When control dock for iPod is used as the input source, assignment of
the HDMI input terminal is disabled, even if it is assigned.
When “HDMI Control” – “Control” (vpage 37) is set to “ON”, HDMI
input terminal cannot be assigned to “TV”.
b
•
•
•
•
•
•
Digital
DIGITAL
Set this to change the digital
input terminals assigned to
the input sources.
The
CD DVD HDP TV SAT/CBL VCR DVR V.AUX SIRIUS
input sources are assigned to the digital input terminals as shown below.
COAX 1 (COAXIAL) / COAX 2 / COAX 3 / OPT 1 (OPTICAL) / OPT 2 / OPT
3 / D.LINK (DENON LINK)
z
z : “D.LINK” is set when the AVR-4310CI is connected by DENON LINK
to a DENON Blu-ray disc / DVD player (vpage 20 “Components
Equipped with a DENON LINK Connector”).
None : Do not assign a digital input terminal to the selected input source.
See overleaf
1
Press MENU.
The GUI menu is displayed on the TV
screen.
Use the ui to select “SOURCE
SELECT”, the press ENTER or p.
SOURCE SELECT
DVD
HDP
TV
SAT/CBL
VCR/iPod
DVR
Select input source and make playback setteings
2
Press ui to select the input source
you want to set, then press p.
DVD
Input Assign
Video
Input Mode
Rename
Source Level
The input source is “DVD”
3
Select “Input Assign”, then press
ENTER or p.
The “INPUT ASSIGN” screen is displayed.
INPUT ASSIGN [1/2]
Default
HDMI2
HDMI3
HDMI4
HDMI5
HDMI6
Change HDMI input connector assignment
COAX1
COAX2
None
None
OPT1
OPT2
OPT3
1-RCA
2-RCA
3-RCA
None
None
NoneNoneNone
NoneNone
None
None
Assign
None
None
DVD
HDP
TV
SAT/CBL
VCR/iPod
DVR
V.AUX
HDMI DIGITAL COMP iPod
RETURN
EnterSelect Return
HDMI1
4
Use uio p to move the gray
highlight to the item you want to set.
INPUT ASSIGN [1/2]
Default
HDMI2
HDMI3
HDMI4
HDMI5
HDMI6
Change digital input connector assignment
COAX1
None
None
OPT1
OPT2
OPT3
1-RCA
2-RCA
3-RCA
None
None
NoneNoneNone
NoneNone
None
None
Assign
None
None
DVD
HDP
TV
SAT/CBL
VCR/iPod
DVR
V.AUX
HDMI DIGITAL COMP iPod
RETURN
EnterSelect Return
HDMI1
COAX2
5
Press ENTER, then use o p to select
the input terminal to be assigned.
INPUT ASSIGN [1/2]
Default
HDMI2
HDMI3
HDMI4
HDMI5
HDMI6
Assign COAXIAL 2 input connector
COAX1
None
None
OPT1
OPT2
OPT3
1-RCA
2-RCA
3-RCA
None
None
NoneNoneNone
NoneNone
None
None
Assign
None
None
DVD
HDP
TV
SAT/CBL
VCR/iPod
DVR
V.AUX
HDMI DIGITAL COMP iPod
RETURN
EnterSelect Return
HDMI1
COAX2
6
Press ENTER to enter the setting.
Input Assignments Menu Operationsn
Setting
Main remote control
operation buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confi rm the setting :Return to previous menu
1.AVR4310CIEU.indd 47 2009/04/14 16:37:20