Denon AVR-4310CI - Various Memory Functions

8
Getting Started Connections Settings Remote ControlMulti-zone Information Troubleshooting Specifications
GExample 2H Setup menu screen
z10: Click the menu from which you want to make settings.
The display on the right becomes each setting screen.
z11: Click “SAVE” when you want to save settings, and click
“LOAD” when you want to call settings.
Becomes each operation screen.
z12: Click “v” and select from the displayed items.
z13: Click to determine a setting.
z14: After entering characters, click “Set” to set, or click “Def” to
return to initial setting.
z15: Enter figures or click “<” or “>” to make the setting, and then
click “Set”.
GExample 3H Web configuration screen
z16: Click “ON” when performing Top Menu Link Setup.
When set up, return to the top menu from each operation
screen. (Default setting : “OFF”)
z17: Click to return to the top menu.
z12
z13
z14
z15
z11
z10
z16
z17
GExample 4H PDA menu screen
z18: Select to operate each zone.
NOTE
You cannot change setup menu operations and zone name on the
PDA menu screen.
GExample 5H Net Audio operating screen
z19: Click the menu from which you want to make settings.
z20: Click “v” to select the preset channel you want to play.
z21: Click to stop play.
z22: When registering presets, click “v” to select the channel you
want to register, and then click “MEMORY”.
z23: When searching using an acronym, click “v” and select from
the displayed characters.
z24: Click when selecting menu.
z25: Click to repeat play.
z26: Click to random play.
z18
z19
z26
z22 z23z20 z21
z25
z24
GExample 6H Dedicated iPod Touch screen
When accessed from the iPod Touch browser, an optimized
operation screen is displayed.
b
Personal Memory Plus Function
This function sets the settings (input mode, surround mode, HDMI
output mode, MultEQ XT, Dynamic EQ, Dynamic Volume, audio delay
etc.) last selected for the individual input sources.
Last Function Memory
This stores the settings as they were directly before the standby
mode was set.
When the power is turned back on, the settings are restored to as
they were directly before the standby mode was set.
The surround parameters, tone settings and the volumes of the
different speakers are stored for the individual surround modes.
Various Memory Functions
Playback
Convenient Functions
1.AVR4310CIEU.indd 85 2009/04/14 16:38:11