8
Getting Started Connections Settings Playback Multi-zone Information Troubleshooting Specifications
Operating the Connected Devices by Remote Control Unit
Operating the Main Remote
Control Unit
In ZONE2, ZONE3 and ZONE4 modes, you can switch the main zone
power on or off by pressing [POWER ON] or [POWER OFF].
[QUICK SELECT], [MUTE] and [MASTER VOLUME] can also be
operated when the device selected is something other than [MAIN].
In this case, the zone you used last can be operated. Check using
the zone indicator.
•
•
On the main remote control unit, the display switches according to
the device being operated and the mode.
In the “MAIN”, “SAT TU”, “DTU”, “iPod” and “NET/USB”
modes, when the remote ID is set, the AVR-4310CI can be used
independently even in an environment containing multiple DENON
amplifiers. (vpage 93 “Setting the Remote ID”)
•
•
The mode switches each time [MAIN] is pressed.b
G
MAIN modeH GZONE2 modeH GZONE3 modeH
GMACRO modeH GZONE4 modeH
2
Operate the component.
For details, refer to the component’s operating instructions. b
Operating AV Equipment
1
Press [DEVICE SELECTOR] for the component to be
operated.
The indicator for the component to be operated flashes.
: MAIN / ZONE2 / ZONE3 / ZONE4
z
/ MACRO
: Cannot be used.
: XM / SIRIUS
: HD Radio (Digital Tuner)
: Satellite Receiver / Cable Tuner / IPTV / HDTV (Set Top
Box
)
: iPod
: Network / USB
:
Blu-ray Disc Player / HD DVD Player /
DVD Player (Recorder) / CD Player (Recorder)
:
Digital Video Recorder
: TV
z: The AVR-4310CI cannot be used in the ZONE4 mode.
[MUTE]
[0 ~ 9]
[POWER ON]
[ DVD/HDP]
[ SAT/CBL]
[ VCR/DVR]
[ TV]
[DEVICE
SELECTOR]
[POWER OFF]
[RC SETUP]
[MASTER
VOLUME]
[QUICK
SELECT]
[ MAIN]
Signal
transmission
indicator
Remote Control
1.AVR4310CIEU.indd 89 2009/04/14 16:38:17
To Next Page
Loading...
