Denon AVR-4310CI - Multi-zone Operations: Zone Settings; Zone Menu, Quick Select, and Sleep Timer

88
Getting Started Connections Settings Playback Remote Control Information Troubleshooting Specifications
Sleep Timer Function
It is also possible to save three settings for multi-zone.
GQuick Select DefaultsH
Input Source Volume
Z2/Z3 Quick Select 1 DVD –40dB
Z2/Z3 Quick Select 2 SAT/CBL –40dB
Z2/Z3 Quick Select 3 VCR –40dB
1
Set the items below to the settings you want to save.
q Input Source (vpage 87)
w Volume Level (vpage 87)
2
In the zone mode for which you want to operate, press
and hold the desired QUICK SELECT until “Memory”
appears on the on-screen display.
The current settings will be memorized.
Quick Select Function
This is convenient for playing sources while going to sleep.
1
Press [MAIN] to display the mode for the zone to be
operated.
2
Press [SLEEP] and display the time you want to set.
The “ ” indicator on the display lights.
The time switches as shown below each time [SLEEP] is
pressed.
OFF 120 min 90 min
60 min30 min
To cancel the sleep timer
Press [SLEEP] to set “OFF”.
The “ ” indicator on the display turns off.
n
•
The sleep timer is also canceled when the AVR-4310CI is set to the
standby mode or the ZONE2 or ZONE3 power is turned off.
The settings related to tone adjustment and volume can be made.
Menu Operation
1
In the zone mode for which you want to operate,
press [MENU].
The ZONE2 or ZONE3 menu is displayed on the ZONE2
monitor.
MENU ZONE2
INPUT :SAT/CBL
SIGNAL:ANALOG
VOL. :-40dB
>Bass 0dB
HPF OFF
Treble 0dB
Lch Lev. 0dB
Rch Lev. 0dB
2
Press uio p to select the menu to be set or
operated.
3
Press [MENU] to enter the setting.
The on-screen display disappears.
ZONE2 MENU
>Channel STEREO
Vol.Lev. - VAR -
Vol.Disp Relative
P.On Lev. LAST
Vol.Limit -10dB
Mute Lev. FULL
For ZONE2, the “Zone Setup” can be made while watching the on-
screen display.
Also, when ZONE3 is operated, the on-screen display appears on the
ZONE2 monitor, so operation can be performed watching this on-
screen display.
Multi-zone
Calling the Settings Out
Naming Quick Select settings
See “Quick Select Name” (vpage 43).
n
Press QUICK SELECT at which the settings you want to
call out are saved.
The “ ”, “ ” or “ ” indicator lights on the display.
1.AVR4310CIEU.indd 88 2009/04/14 16:38:16