Denon AVR-X1100W

Error
Code
Details of Error code Display Coping strategies
39
Connection to DPMS has timed
out when rewriting the Main CPU.
C o n n e c t i o n F a i l 3 9
Check the network connection. Update
in an environment where there is a
small network load.
3A
Error (NG) notication was
received when downloading rm-
ware for rewriting the Main CPU.
D o w n l o a d f a i l 3 A
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
3B
Error notication (line congestion)
was received when downloading
rmware for rewriting the Main
CPU.
D o w n l o a d f a i l 3 B
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
3C
Error notication (connection
failure) was received when down-
loading rmware for rewriting the
Main CPU.
D o w n l o a d f a i l 3 C
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
3D
Failed to acquire the IP address
(Auto IP) before CX870 rewrite
(Boot Loader Mode).
C o n n e c t i o n F a i l 3 D
Check the network connection. Update
in an environment where there is a
small network load.
3E
Failed to acquire the IP address
before CX870 rewrite (Boot
Loader Mode) (timed out).
C o n n e c t i o n F a i l 3 E
Check the network connection. Update
in an environment where there is a
small network load.
50
Log in to DPMS failed when
rewriting the DSP, PLD etc. rm-
ware.
L o g i n f a i l e d 5 0
Update in an environment where there
is a small network load.
51
Unit logs in to DPMS to rewrite
the DSP, PLD etc. rmware, but
the line etc. is congested.
S e r v e r i s b u s y 5 1
Update in an environment where there
is a small network load.
52
Connect to DPMS failed when
rewriting the DSP, PLD etc. rm-
ware.
C o n n e c t i o n F a i l 5 2
Check the network connection. Update
in an environment where there is a
small network load.
54
Unit logs in to DPMS to rewrite
the DSP, PLD etc. rmware, but
error was received as rmware
information.
U p d a t i n g f a i l 5 4
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
55
Unit logs in to DPMS to rewrite
the DSP, PLD etc. rmware, but
logged into DPMS and requested
rmware data information but a
timeout occurred.
U p d a t i n g f a i l 5 5
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
56
Unit logs in to DPMS to rewrite
the DSP, DLP etc. rmware, but
failed to download the rmware.
D o w n l o a d f a i l 5 6
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
57
Unit logs in to DPMS to rewrite
the DSP, DLP etc. rmware, but
download rmware error was
received (line congestion).
D o w n l o a d f a i l 5 7
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
58
Unit logs in to DPMS to rewrite
the DSP, DLP etc. rmware, but
download rmware error was
received (connection failure).
D o w n l o a d f a i l 5 8
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
5A
NACK was received when "C"
command was sent to DSP, PLD
etc.
C o n n e c t i o n F a i l 5 A
Turn on the power again. Update will
start automatically.
5B
NACK was received when "L"
command was sent to DSP, PLD
etc.
U p d a t i n g f a i l 5 B
Turn on the power again. Update will
start automatically.
66