Denon AVR-X6700H User Manual

Registering preset codes
There are two methods for registering preset codes; the simple method for
registering preset codes of Denon players, and the method for registering
the preset numbers of other manufacturers’ devices.
0
“Registering Denon players” (v p. 286)
0
“Registering by entering preset numbers” (v p. 287)
o
Registering Denon players
Use the following simple method to register the preset codes of Denon
Blu-ray Disc players, DVD players and CD players.
n
Registering Blu-ray Disc players
1
Press and hold down Blu-ray and OPTION until the
DEV., TV and AVR indicators on the remote are flashing
green, then release.
n
Registering DVD players
1
Press and hold down DVD and OPTION until the DEV.,
TV and AVR indicators on the remote are flashing
green, then release.
n
Registering CD players
1
Press and hold down CD and OPTION until the DEV., TV
and AVR indicators on the remote are flashing green,
then release.
Contents Connections Playback Settings Tips Appendix
286
Front panel Display Rear panel Remote Index

Denon AVR-X6700H Specifications

General

Channels	11.2
Power Output	140W per channel (8 ohms, 20Hz-20kHz, 0.05% THD)
Speaker Impedance	4-16 ohms
Input Sensitivity/Impedance	200mV / 47k ohms
HDMI Inputs	8
HDMI Outputs	3
HDCP Support	HDCP 2.3
HDR Compatibility	HDR10, HDR10+, Dolby Vision, HLG
Audio Return Channel (ARC)	eARC
Video Upscaling	8K
Bluetooth	Yes
Wi-Fi	Yes
Ethernet	Yes
Voice Assistant Support	Amazon Alexa, Google Assistant, Apple Siri
Phono Input	Yes
Zone Audio Output	3 Zones
Room Calibration	Audyssey MultEQ XT32
Frequency Response	10Hz-100kHz (+1, -3 dB, Direct Mode)
Total Harmonic Distortion	0.05%
Signal-to-Noise Ratio	102dB
HDMI Support	4K/120Hz, 8K/60Hz
USB Port	1
Streaming Services	AirPlay 2, HEOS, Spotify, Tidal, Deezer, Amazon Music, Pandora, SiriusXM
Audio Decoding	Dolby Atmos, DTS:X, Auro-3D