Refer to the example connection for “Example connection for the Auro-3D
9.1-channel system” (v p. 60) when playing Auro-3D with a 9.1-
channel system using the basic 5.1-channel system and the front height
and surround height speakers.
Also refer to the connection example for “Example connection for the
Auro-3D 13.1-channel system” (v p. 69) when playing Auro-3D with a
13.1-channel system by adding the Surround Back, Top Surround and
Center Height speakers.
0
In addition to the connections described in
p.47 - 79, this unit allows for various
speaker connections with the “Amp Assign” setting.
Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign”
setting screen, which shows how to make connections in your environment.
.
CENTER SURROUND SURROUNDFRONTFRONT CENTER SURROUND
SURR.BACK
SURROUNDFRONT
SURR. BACK
FRONT HEIGHT1 HEIGHT1HEIGHT1 HEIGHT1
T.FRONT T.REARSURR.BACKSURROUNDCENTERFRONT
HEIGHT2
HEIGHT2
SUBWOOFER
1
2
SUBWOOFER
HEIGHT3 HEIGHT3
SPEAKERS
Speakers/Amp Assign
PRE OUT
Assign Mode 11.1ch
Back
Contents
Connections Playback Settings Tips Appendix
46
Front panel Display Rear panel Remote Index
To Next Page
Loading...
