0065-0647-OM Rev E 7550 OWNER’S MANUAL
SCALE SETUP, CONT.
Settings Page 7
SETTINGS PAGE 7
Bluetooth: On
Wi-Fi: Off
SSID: Dynex617
<<< Exit >>>
Bluetooth:
Touch this key to open a selection screen to turn the Bluetooth 5.0 wireless transmitter “On”
or “Off”. This setting should be “On” if pairing to a Bluetooth-capable device is desired.
Using the numeric keys, enter a new setting, and then press Save.
Allowable settings for Bluetooth are: 0 = Off, 1 = On
Wi-Fi:
Touch this key to open a selection screen to turn the Wi-Fi wireless transmitter “On” or “Off”.
This setting should be “On” if interfacing through a Wi-Fi network is desired. Using the
numeric keys, enter a new setting, and then press Save.
Allowable settings for Wi-Fi are: 0 = Off, 1 = On
NOTE: If the Wi-Fi setting is 0 = Off, you will not see the SSID: setting and >>> on
the touchscreen to advance to Settings Page 8.
SSID:
This will show you the current SSID of the Wi-Fi network that is saved in memory for the
Icon to connect to.
Touching this key will prompt you to CLEAR SSID. Press 1 on the touchscreen, and then
press Save to clear the Wi-Fi credentials.
Press >>> to advance to the Settings Page 8.
Press <<< to return to the Settings Page 6.
Press Exit to exit Setup and return to the Weight screen.
The SSID: value will not
be shown if Wi-Fi: = Off.
To Next Page
Loading...
Need help?
General
