9
Features
functions and the call-queuing func-
tion.
You can also connect two
OpenCom 100s. This cascading of
telecom systems is a simple way to
increase the number of terminals
that can be connected.
As your company’s requirements
grow, the OpenCom 100 can be net-
worked with other telecom systems.
The OpenCom 100 can then operate
as a sub-system or DECT server. It is
also possible to create a telecom sys-
tem with several networked telecom
installations.
Tip: Refer to the explanations in
the glossary (supplied as a PDF file
on the system CD-ROM).
To Next Page
Loading...
