45
Configuration
Configuration
Configuration and programming of
the OpenCom 100 is performed by
the Configurator, a special software
application integrated into the sys-
tem. The Configurator is operated
via the Web console, which can be
run on any PC connected to the
OpenCom 100.
The OpenCom 105 Web console
Using the Web console, you can:
■ perform the initial configura-
tion of the OpenCom 100,
■ configure users of the
OpenCom 100 and authorise
them to use certain system serv-
ices,
■ carry out further
system maintenance,
■ use PC-supported telephony
functions,
■ read out call charge information,
■ access the OpenCom 100 tele-
phone book.
The Web console has an integrated
online help function that offers com-
prehensive information on configu-
ration and maintenance of the
OpenCom 100 (see Loading the On-
line Help starting on page 56).
Note: In order to use all the new
system software functions, we recom-
mend that you download the latest
software from our Web site at
http://www.detewe.com.
For the initial configuration you can
connect the PC to the OpenCom 100
To Next Page
Loading...
